AVPro 10G SDVOE 4K HDMI AV-over-IP POE Transceiver w / USB 2.0

• USB Speeds 
• Max Throughout 
• Device Compatibility 
• Maximum Range 
• True Plug and Play 
• Driverless 
• Compression-Free
• Available Signal Types 
• Ultra-Low Latency 

• Ethernet: (1) 10G female RJ45 port for SDVoE and Dante streams transmissions, (1) 1G female RJ45 port for Ethernet extension or CBOX control, Both are PoE compatible 
• SFP+: (1) 10G SFP+ Port used for SDVoE and Dante streams transmissions 
• HDMI: (1) HDMI input (1) HDMI output
• Audio: (1) TOSLINK (1) x 3 Pin Terminal Block (1) 3.5mm female stereo jack; it can be audio input or audio output, depending on if TCVR is in Encoder or Decoder mode respectively 
• IR: (1) 3.5mm IR OUT Port (1) 3.5mm IR-EYE Port (1) 3.5mm I-Pass Port 
• RS232: (1) x 3 Pin Terminal Block for MXNet System Control 
• USB: (1) USB Type-C for MXNet Service (1) USB Type-B full speed USB 2.0 480 Mbps Data Rate (2) USB Type-A full speed USB 2.0 480 Mbps Data Rate 
• Ethernet Distance: 330 FT over CAT6a
• SFP+ and Fiber Distance: 10G SFP+ AOC cable up to 3 meters, 10G SFP+ Multimode transceiver over multimode fiber up to 550 meters, 10G SFP+ Single mode transceiver over Single mode fiber up to 20 Kilometers 
• PoE (Power over Ethernet): IEEE 802.3af (15.4W)
• Power Supply Unit: Input-AC 120-240V, 50/60Hz, 0.8A / Output-DC 12V, 2A

• Size: 8.46” x 5.51” x 0.98” 
• Shipping Size: 12.2” x 7.09” x 2.13” 
• Weight: 1.76 lbs. 
• Shipping Weight: 2.25 lbs. 

• AC-MXNET-10G-TCVR-PRO (Transceiver)
• 1 x IR Tx Unit
• 1 x IR Rx Unit
• 2 x Mounting Brackets
• 4 x Rubber Feet
• 3 x 3-Pin to L/R RCA Audio Cable

Special Order Only