DISH Pro Switch DPH42 Hybrid Multiswitch

DN015282

Features

Supports the installation of multiple Hopper, Joey, Wally and ViP receivers – Including any combination of two of these receiver types
Provides connections for up to four satellite feeds from a DISH Pro (DP) or DISH Pro Plus (DPP) LNBF
Alternately, the DPH42 satellite inputs may be fed by the "To Additional" switch (trunk) outputs of a DPP44 or DP34
Supports Hopper 3 receiver with a DP or DPP dish antenna
Approved for use to ground the dish system
The DPH42 has a hard plastic material inside the input and output ports that make it easy to align the center conductor of the coax cable when connecting
Because the ports of the DPH42 are not self-sealing a CAP must be used on any unused ports to eliminate moisture migration
Note that the CAPs that are provided with the DPH42 are different than the 75 Ohm terminators that are used toterminate unused client ports on a Node or DPH Hub
Do NOT install 75 Ohm terminators on the DPH42